Bottom-up approach in the assessment of environmental impacts and costs of an innovative anammox-based process for nitrogen removal
Por favor, use este identificador para citas ou ligazóns a este ítem:
http://hdl.handle.net/10347/29376
Ficheiros no ítem
Metadatos do ítem
Título: | Bottom-up approach in the assessment of environmental impacts and costs of an innovative anammox-based process for nitrogen removal |
Autor/a: | Arias Cisterna, Andrea Câmara Salim, Iana Pedrouso Fuentes, Alba Mosquera Corral, Anuska Rogalla, Frank Feijoo Costa, Gumersindo Moreira Vilar, María Teresa |
Centro/Departamento: | Universidade de Santiago de Compostela. Departamento de Enxeñaría Química Universidade de Santiago de Compostela. Instituto Interdisciplinar de Tecnoloxías Ambientais (CRETUS) |
Palabras chave: | Scale-up analysis | Partial nitritation-anammox | Sustainable wastewater treatment | Life cycle assessment (LCA) | Eco-efficiency | Economic evaluation | |
Data: | 2018 |
Editor: | Elsevier |
Cita bibliográfica: | Journal of Environmental Management 225 (2018) |
Resumo: | In recent decades, the wastewater treatment sector has undergone a shift to adapt to increasing discharge limits. In addressing the evaluation of innovative technologies, it is necessary to determine the scale at which reliable and representative values of environmental impacts and costs can be obtained, ensuring that the system under assessment follows the direction of eco-efficiency. This study has evaluated the environmental and economic indicators of an autotrophic nitrogen removal technology (ELAN®) from laboratory conception (1.5 L) to full scale (2 units of 115 m3) using the Life Cycle Assessment (LCA) methodology. Indirect emissions related to electricity consumption are the main contributor in all impact categories except eutrophication. Electricity consumption referred to the functional unit (1 m3 of treated wastewater) decreases as the scale increases. The rationale behind this can be explained, among other reasons, by the low energy efficiency of small-scale equipment (pumps and aerators). Accordingly, a value of approximately 25 kg CO2eq per m3 of treated water is determined for laboratory scale, compared to only 5 kg CO2eq per m3 at full-scale. When it comes to assessing the reliability of data, a pilot scale system of 0.2 m3 allowed to perform a trustworthy estimation of environmental indicators, which were validated at full-scale. In terms of operational costs, the scale of approximately 1 m3 provided a more accurate estimate of the costs associated with energy consumption |
Versión do editor: | https://doi.org/10.1016/j.jenvman.2018.07.070 |
URI: | http://hdl.handle.net/10347/29376 |
DOI: | 10.1016/j.jenvman.2018.07.070 |
ISSN: | 0301-4797 |
E-ISSN: | 1095-8630 |
Dereitos: | © 2018 Elsevier Ltd. This work is licenced under a CC Attribution-NonCommercial-NoDerivatives 4.0 International licence (CC BY-NC-ND 4.0) |
Coleccións
-
- BIOGROUP-Artigos [134]
- CRETUS-Artigos [232]
- EQ-Artigos [292]